Results

function Question (qname, type, qstring, response, comment, corrects, explan, score, ifcorrect,ifwrong,ifnull, img) {this.qname=qname; this.type=type; this.qstring=qstring; this.response=response; this.comment=comment; this.corrects=corrects; this.explan=explan; this.score=score; this.ifcorrect=ifcorrect; this.ifwrong=ifwrong; this.ifnull=ifnull; this.img=img; } var zin=1,top=0, mycount=0, waitTime=0, qright=0, mycomment; var global=new Array(3); var recent, recent2, recdone=false, opera7, opera=CheckOpera56(); function cachewrite(s,idx){global[idx]+=s;} function CheckOpera56() { var version; if (navigator.userAgent.toLowerCase().indexOf('opera') == -1) return false; version=parseInt(navigator.appVersion.toLowerCase()); if (version>6) {opera7=true; return false;} if (version<5) return false; return true; } resp=new Array("The actual size of the discontinuity can be measured","The depth of the defect can be measured","The cause of the impact can be seen","It makes defects easier to see for the inspector") corr=new Array("0","0","0","1") comm="" valu="" quest001 = new Question( "Question 1", 0, "The advantage that liquid penetrant testing has over an unaided visual inspection is that:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("0.003 inches","0.03 inches","0.03 mm","0.3cm") corr=new Array("1","0","0","0") comm="" valu="" quest002 = new Question( "Question 2", 0, "The threshold of visual acuity for a person with 20/20 vision is about:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Close to infrared light","Close to the wavelength of x-rays","That the eye is most sensitive to under dim lighting conditions","In the red spectrum") corr=new Array("0","0","1","0") comm="" valu="" quest003 = new Question( "Question 3", 0, "When fluorescent penetrant inspection is performed, the penetrant materials are formulated to glow brightly and to give off light at a wavelength:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Slightly damp","Clean and smooth to the touch","Free of oil, grease, water and other contaminants","All of the above") corr=new Array("0","0","1","0") comm="" valu="" quest004 = new Question( "Question 4", 0, "When performing a liquid penetrant test, the surface of the part under inspection should be:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("The part may also require etching","It can be immersed in penetrant for its entire dwell time","It will require a shorter dwell time","It will need to be heated in order to open any cracks that have been peened over") corr=new Array("1","0","0","0") comm="" valu="" quest005 = new Question( "Question 5", 0, "If the surface of the part has been machined, sanded or grit blasted:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Spraying","Brushing","Dipping","All of the above") corr=new Array("0","0","0","1") comm="" valu="" quest006 = new Question( "Question 6", 0, "Once the surface of the part has been cleaned properly, penetrant can be applied by:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Soak time","Baking time","Dwell time","Immersion time") corr=new Array("0","0","1","0") comm="" valu="" quest007 = new Question( "Question 7", 0, "The total time that the penetrant is in contact with the part surface is called the:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("1-5 minutes","1-30 minutes","5-60 minutes","60-100 minutes") corr=new Array("0","0","1","0") comm="" valu="" quest008 = new Question( "Question 8", 0, "Minimum penetrant dwell times are usually:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Is not allowed to dry","Stays viscous","Does not form clumps on the surface of the part","Is mixed with emulsifier") corr=new Array("1","0","0","0") comm="" valu="" quest009 = new Question( "Question 9", 0, "Generally, there is no harm in using a longer penetrant dwell time as long as the penetrant:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Dusting","Dipping","Spraying","All of the above") corr=new Array("0","0","0","1") comm="" valu="" quest010 = new Question( "Question 10", 0, "Developers come in a variety of forms and can be applied by:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("10 minutes","10 seconds","20-30 minutes","5-60 minutes") corr=new Array("1","0","0","0") comm="" valu="" quest011 = new Question( "Question 11", 0, "Developer times are usually in the range of:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Heated to a temperature above 100^o F","Is not extremely rough or porous","Smooth and uniform","Cleaned with number 005 grit") corr=new Array("0","1","0","0") comm="" valu="" quest012 = new Question( "Question 12", 0, "LPI can be used to test most materials provided the surface of the part is:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Large areas can be inspected","Parts with complex shapes can be inspected","It is portable","All of the above is an advantage") corr=new Array("0","0","0","1") comm="" valu="" quest013 = new Question( "Question 13", 0, "Which of the following is an advantage to LPI?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Only surface breaking flaws can be detected","Surface finish and roughness can affect inspection sensitivity","Post cleaning is required","All of the above") corr=new Array("0","0","0","1") comm="" valu="" quest014 = new Question( "Question 14", 0, "Which of the following is a disadvantage of LPI?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Change viscosity in order to spread over the surface of the part","Spread easily over the surface of the material","Have a low flash point","Be able to change color in order to fluoresce") corr=new Array("0","1","0","0") comm="" valu="" quest015 = new Question( "Question 15", 0, "A penetrant must:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Perform equally","Perform the same no matter who manufacturers them","Shift in grade and value when the temperature changes","Remain fluid so it can be drawn back to the surface of the part") corr=new Array("0","0","0","1") comm="" valu="" quest016 = new Question( "Question 16", 0, "Penetrants are designed to:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Should only be used on aerospace parts","Will also produce the largest amount of irrelevant indications","Can only be used on small parts less than 10 inches in surface area","Should not be used in the field") corr=new Array("0","1","0","0") comm="" valu="" quest017 = new Question( "Question 17", 0, "The pentrants that are used to detect the smallest defects:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Type I","Type II","Type III","Type IV") corr=new Array("0","1","0","0") comm="" valu="" quest018 = new Question( "Question 18", 0, "Which type of penetrant is a visible penetrant?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Type I","Type II","Type III","Type IV") corr=new Array("1","0","0","0") comm="" valu="" quest019 = new Question( "Question 19", 0, "Which type of penetrant is a fluorescent penetrant?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Type I","Type II","Type III","Type IV") corr=new Array("1","0","0","0") comm="" valu="" quest020 = new Question( "Question 20", 0, "Which type of penetrant is most sensitive?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Type I","Type II","Type III","Type IV") corr=new Array("0","1","0","0") comm="" valu="" quest021 = new Question( "Question 21", 0, "Which type of penetrant is less vulnerable to contamination from cleaning fluid?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Method A","Method B","Method C","Method D") corr=new Array("1","0","0","0") comm="" valu="" quest022 = new Question( "Question 22", 0, "Which method of penetrant removal is water washable?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Method A","Method B","Method C","Method D") corr=new Array("0","1","0","0") comm="" valu="" quest023 = new Question( "Question 23", 0, "Which method of penetrant removal is post emulsified, lipophilic?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Method A","Method B","Method C","Method D") corr=new Array("0","0","1","0") comm="" valu="" quest024 = new Question( "Question 24", 0, "Which method of penetrant removal is solvent removable?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Method A","Method B","Method C","Method D") corr=new Array("0","0","0","1") comm="" valu="" quest025 = new Question( "Question 25", 0, "Which method of penetrant removal is post emulsified, hydrophilic?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Level I","Level II","Level III","Level IV") corr=new Array("0","0","0","1") comm="" valu="" quest026 = new Question( "Question 26", 0, "Which level of penetrant is the most sensitive?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Toxicity","Flash point","Corrosiveness","All of the above") corr=new Array("0","0","0","1") comm="" valu="" quest027 = new Question( "Question 27", 0, "What industry and military specifications control a penetrants?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Are most often used in the field","Should never be used in the field","Require a separate emulsifier to break the penetrant down and make it water washable","Require a separate emulsifier to break down the cleaner and make it solvent removable") corr=new Array("0","0","1","0") comm="" valu="" quest028 = new Question( "Question 28", 0, "Post emulsified penetrants:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Hydrophilic emulsifier","Lipophilic emulsifier","Solvent removable emulsifier","All of the above have an oil base") corr=new Array("0","1","0","0") comm="" valu="" quest029 = new Question( "Question 29", 0, "Which emulsifier system is oil based?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Hydrophilic emulsifier","Lipophilic emulsifier","Type I emulsifier","Form A emulsifier") corr=new Array("1","0","0","0") comm="" valu="" quest030 = new Question( "Question 30", 0, "Which emulsifier system is water based?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Hydrophilic emulsifier","Lipophilic emulsifier","Fluorescent emulsifier","Visible dye emulsifier") corr=new Array("0","1","0","0") comm="" valu="" quest031 = new Question( "Question 31", 0, "Which emulsifier is most sensitive to contact time when applied to the parts surface?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Make the penetrant fluoresce","Reduce the dwell time","Pull trapped penetrant material out of the defect","All of the above") corr=new Array("0","0","1","0") comm="" valu="" quest032 = new Question( "Question 32", 0, "Developers are used to:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Form a","Form b","Form c","Form d") corr=new Array("1","0","0","0") comm="" valu="" quest033 = new Question( "Question 33", 0, "Which developer form is used for dry powder developer?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Form a","Form b","Form c","Form d") corr=new Array("0","1","0","0") comm="" valu="" quest034 = new Question( "Question 34", 0, "Which developer form is used for water soluble developer?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Form a","Form b","Form c","Form d") corr=new Array("0","0","1","0") comm="" valu="" quest035 = new Question( "Question 35", 0, "Which developer form is used for water suspendible developer?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Form a","Form b","Form c","Form d") corr=new Array("0","0","0","1") comm="" valu="" quest036 = new Question( "Question 36", 0, "Which developer form is used for nonaqueous Type I developer?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Dry developer","Non-aqueous wet developer","Hydrophilic developer","Lipophilic developer") corr=new Array("1","0","0","0") comm="" valu="" quest037 = new Question( "Question 37", 0, "Which developer is commonly considered as the least sensitive?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("To a wet part","To a partially wet part but needs to be placed in a dryer immediately","To a dry part","All of the above") corr=new Array("0","0","1","0") comm="" valu="" quest038 = new Question( "Question 38", 0, "Dry developer can be applied:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Saturated in water and experience a chemical shift allowing it to fluoresce on the parts surface","Only used on rough porous surfaces","Dissolved in water","Not to be used on galvanized parts") corr=new Array("0","0","1","0") comm="" valu="" quest039 = new Question( "Question 39", 0, "Water soluble developers consist of a group of chemicals that are:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Saturated in water and experience a chemical shift allowing it to fluoresce on the parts surface","Only used on rough porous surfaces","Dissolved in water","Insoluble in water but can be suspended in the water after mixing or agitation") corr=new Array("0","0","0","1") comm="" valu="" quest040 = new Question( "Question 40", 0, "Water suspendible developers consist of a group of chemicals that are:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("By dusting the surface of the part","By dipping the part is a mixed batch of developer","By splashing the surface with a brush","By aerosol spraying") corr=new Array("0","0","0","1") comm="" valu="" quest041 = new Question( "Question 41", 0, "Nonaqeous developer is typically applied:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Lacquer developer","Nonaqueous developer","Layered developer","Peeling developer") corr=new Array("1","0","0","0") comm="" valu="" quest042 = new Question( "Question 42", 0, "When a permanent record is required which type of developer can be used:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Varnish","Oxides","Plating","All of the above") corr=new Array("0","0","0","1") comm="" valu="" quest043 = new Question( "Question 43", 0, "Which of the following should be removed in order to obtain a good penetrant test?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("The paint will fill in the cracks and change the fluorescence of the penetrant","Paint is more elastic than metal and will not fracture","The penetrant will adhere to the paint resulting in maximum fluorescence","All of the above apply") corr=new Array("0","1","0","0") comm="" valu="" quest044 = new Question( "Question 44", 0, "Large defects can be hidden under a paint surface because:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("A shift in the fluorescent wavelength to a lower angstrom level","The part needing to be redipped in order to produce good results","Higher background fluorescence","All of the above") corr=new Array("0","0","1","0") comm="" valu="" quest045 = new Question( "Question 45", 0, "Surface contaminants can lead to:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Remove all contamination from the part and not leave any reside that may interfere with the inspection process","Remove a small amount of metal from the surface of the part","Should leave the part slightly flourescent in order to identify any discontinuities","Should etch the part slightly only if it is made from 4041 aluminum") corr=new Array("1","0","0","0") comm="" valu="" quest046 = new Question( "Question 46", 0, "A good cleaning procedure will:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("In a better penetrant inspection","In a longer dwell time in order to produce adequate penetration of the penetrant","Longer dwell times","Metal smearing") corr=new Array("0","0","0","1") comm="" valu="" quest047 = new Question( "Question 47", 0, "It is well recognized that machining, honing, lapping and hand sanding will result:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Fluorescent, post-emulsifiable","Visible dye, water washable","Visible dye, solvent removable","Fluorescent, water washable") corr=new Array("0","0","1","0") comm="" valu="" quest048 = new Question( "Question 48", 0, "Which penetrant method is easiest to use in the field?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Dipping","Brushing","Spraying","All of the above") corr=new Array("0","0","0","1") comm="" valu="" quest049 = new Question( "Question 49", 0, "Penetrant can be applied by:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Leaving the part immersed in the penetrant for the entire dwell time","Leaving the part immersed in the wet developer for the entire developer time","Using a nonaqueous wet developer","Allowing the specimen to drain-dwell during its dwell time") corr=new Array("0","0","0","1") comm="" valu="" quest050 = new Question( "Question 50", 0, "Which of the following will produce higher sensitivity of a penetrant test?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Penetrant dwell time","Developer time","Emulsifier time","Penetrant evaporation time") corr=new Array("1","0","0","0") comm="" valu="" quest051 = new Question( "Question 51", 0, "The total time the penetrant is in contact with the part surface is called the:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Method A","Method B","Method C","Method D") corr=new Array("0","0","1","0") comm="" valu="" quest052 = new Question( "Question 52", 0, "Which method is used to primarily to inspect small localized areas?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Fluorescent water washable method","Visible dye solvent removable method","Visible dye water washable method","Fluorescent post emulsified method") corr=new Array("0","0","0","1") comm="" valu="" quest053 = new Question( "Question 53", 0, "When removal of penetrant from the defect due to overwashing of the part is a concern, which method would most often be used?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Spray","Brush","Dip","Both A and B") corr=new Array("0","1","0","0") comm="" valu="" quest054 = new Question( "Question 54", 0, "Application of the emulsifier should not be performed with a:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Type I method A","Type I method B","Type I method D","Type II method D") corr=new Array("0","0","1","0") comm="" valu="" quest055 = new Question( "Question 55", 0, "The steps listed would represent which type of penetrant method? 1. Pre-clean 2. Apply penetrant and allow to dwell. 3. Pre-rinse to remove first layer of penetrant. 4. Apply hydrophilic emulsifier 5. Rinse to remove excess penetrant 6. Dry part 7. Apply developer and allow part to develop 8. Inspect.", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("20 degrees","45 degrees","90 degrees","It does not matter what angle the spray is applied") corr=new Array("0","1","0","0") comm="" valu="" quest056 = new Question( "Question 56", 0, "When the excess penetrant is removed from the surface of the part, a course water spray should be directed at an angle of:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Care must be taken when removing the penetrant from the surface of the part","It should be washed off the surface of the part at an angle of 45 degrees","A low impact emulsifier should always be used","A solvent removable emulsifier should also be used") corr=new Array("1","0","0","0") comm="" valu="" quest057 = new Question( "Question 57", 0, "When solvent removable penetant is used:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Product of discontinuities","Probability of defects","Probability of detection","Personnel over distributor") corr=new Array("0","0","1","0") comm="" valu="" quest058 = new Question( "Question 58", 0, "POD stands for:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Water suspendable","Water soluble","Dry powder","Nonaqueous wet") corr=new Array("0","0","0","1") comm="" valu="" quest059 = new Question( "Question 59", 0, "Which type of developer is considered the most sensitive?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("50 to 80^oF","80 to 120^o F","35 to 100^o F","80 to 100^o F") corr=new Array("0","1","0","0") comm="" valu="" quest060 = new Question( "Question 60", 0, "What is the optimal temperature of penetrant materials and the part under inspection in order to obtain the best results?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Raise the speed of evaporation of penetrants","Reduce the emulsifier time","Increase the developer time","Require the need of a post emulsified penetrant") corr=new Array("1","0","0","0") comm="" valu="" quest061 = new Question( "Question 61", 0, "Raising the temperature will:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Will remain consistent as long is it is stored in a temperature range of 50 to 100^o F","Will only degrade of the temperature exceeds 120^o F","Can be affected by contamination and aging","Can be adjusted with the dwell time") corr=new Array("0","0","1","0") comm="" valu="" quest062 = new Question( "Question 62", 0, "The performance of a penetrant:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Will only take place if the part has not been cleaned","Will occur because of the crossover between the penetrant and developer","Will occur if the tank is not covered during the dwell time","Will change the surface tension and contact angle") corr=new Array("0","0","0","1") comm="" valu="" quest063 = new Question( "Question 63", 0, "Contamination of the penetrant:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("A sample of fresh solution should be collected and stored as a standard for future comparison","It should be compared to the previous batch of penetrant","It should be mixed with the used penetrant in order to increase its sensitivity","It should be compared to the previous penetrants sensitivity") corr=new Array("1","0","0","0") comm="" valu="" quest064 = new Question( "Question 64", 0, "When penetrant is first received from the manufacturer:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("ASTM 410","API 410","ASNT TC-1A","ASTM E 1417") corr=new Array("0","0","0","1") comm="" valu="" quest065 = new Question( "Question 65", 0, "When using a fluorescent penetrant, the brighness comparison is performed to:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Should be performed daily","Should be performed weekly","Should be performed monthly","Must be checked regularly") corr=new Array("0","1","0","0") comm="" valu="" quest066 = new Question( "Question 66", 0, "The water content of water washable penetrant:s:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("1 percent","2 percent","5 percent","10 percent") corr=new Array("0","0","1","0") comm="" valu="" quest067 = new Question( "Question 67", 0, "Most specifications limit water contamination to around:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Centrifuge","Refractometer","Centrifuge scope","Crack block") corr=new Array("0","1","0","0") comm="" valu="" quest068 = new Question( "Question 68", 0, "Water based, water washable penetrant are checked with a:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("25 psi","40 psi","50 psi","70 psi") corr=new Array("0","1","0","0") comm="" valu="" quest069 = new Question( "Question 69", 0, "When removing water washable penetrant the maximum water pressure should be:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("As long as the specifications allow","Based on the temperature of the part","As long as necessary to decrease the background to an acceptable level","Longer if the water temperature increases") corr=new Array("0","0","1","0") comm="" valu="" quest070 = new Question( "Question 70", 0, "When removing excess penetrant with water, the wash time should be:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Penetrant fading","Developer fading","Emulsifier sensitivity","Emulsifier fading") corr=new Array("1","0","0","0") comm="" valu="" quest071 = new Question( "Question 71", 0, "Dye vaporization or sublimation can result in:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Draw out the penetrant from the discontinuity","Provide contrast between the penetrant and the parts background color","Increase the pentrants fluorescence","Both A and B") corr=new Array("0","0","0","1") comm="" valu="" quest072 = new Question( "Question 72", 0, "Developer is required to:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Daily","Weekly","Monthly","Every 500 parts run through it") corr=new Array("1","0","0","0") comm="" valu="" quest073 = new Question( "Question 73", 0, "Dry developer should be checked ______ in order to ensure it is fluffy and not caked:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Daily","Weekly","Monthly","Every 500 parts") corr=new Array("0","1","0","0") comm="" valu="" quest074 = new Question( "Question 74", 0, "How often should the wet soluble powder concentration be checked?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("After the part has been dryed","Immediately after the excess penetrant has been removed from the parts surface","After the emulsifer dwell time","After the part has been dipped in cleaner/remover") corr=new Array("0","1","0","0") comm="" valu="" quest075 = new Question( "Question 75", 0, "Wet developers are applied:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Dipping","Brushing","Spraying","Immersion") corr=new Array("0","0","1","0") comm="" valu="" quest076 = new Question( "Question 76", 0, "Solvent suspendable developers are applied by:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("A minimum of 50 foot-candles","A maximum of 50 foot-candles","A maximum of 100 foot-candles","A minimum of 100 foot-candles") corr=new Array("0","0","0","1") comm="" valu="" quest077 = new Question( "Question 77", 0, "White light intensity at the surface of the part when using a visible dye penetrant should be:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("A minimum of 100 foot-candles","A maximum of 100 foot-candles","A minimum of 50 foot-candles","A maximum of 2 foot-candles") corr=new Array("0","0","0","1") comm="" valu="" quest078 = new Question( "Question 78", 0, "White light intensity at the surface of the part when using fluorescent penetrant should be:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Mercury arc lamp with filter","Wave shift arc lamp","UV lamp with filter","Filter over a minimum 100 watt light bulb") corr=new Array("1","0","0","0") comm="" valu="" quest079 = new Question( "Question 79", 0, "The source of ultraviolet light (UV) if often a:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Only be used with a Franklin filter","Only be used with Type II penetrants","Never be used with a cracked filter","Never be used with Knoop filters") corr=new Array("0","0","1","0") comm="" valu="" quest080 = new Question( "Question 80", 0, "Black lights should:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("100","500","700","1000") corr=new Array("0","0","0","1") comm="" valu="" quest081 = new Question( "Question 81", 0, "For UV lights used in LPI, the accepted intensity is _______ microwatts per square centimeter.", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("When a new bulb is installed","At startup of inspection cycle","Every 8 hours","All of the above") corr=new Array("0","0","0","1") comm="" valu="" quest082 = new Question( "Question 82", 0, "How often should the UV light intensity be performed?", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("1","5","10","15") corr=new Array("0","0","0","1") comm="" valu="" quest083 = new Question( "Question 83", 0, "Most UV lights must be warmed up at least ___ minutes before beginning the inspection.", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("Refractometer","Radiometer","Pie gauge","UV meter") corr=new Array("0","1","0","0") comm="" valu="" quest084 = new Question( "Question 84", 0, "Light intensity measurements are made using a:", resp, comm, corr, "", valu, 1, 0, 0, ""); resp=new Array("2","4","6","12") corr=new Array("0","1","0","0") comm="" valu="" quest085 = new Question( "Question 85", 0, "Radiometers should be calibrated every ___ months.", resp, comm, corr, "", valu, 1, 0, 0, ""); questions = new Array ( quest001,quest002,quest003,quest004,quest005,quest006,quest007,quest008,quest009,quest010,quest011,quest012,quest013,quest014,quest015,quest016,quest017,quest018,quest019,quest020,quest021,quest022,quest023,quest024,quest025,quest026,quest027,quest028,quest029,quest030,quest031,quest032,quest033,quest034,quest035,quest036,quest037,quest038,quest039,quest040,quest041,quest042,quest043,quest044,quest045,quest046,quest047,quest048,quest049,quest050,quest051,quest052,quest053,quest054,quest055,quest056,quest057,quest058,quest059,quest060,quest061,quest062,quest063,quest064,quest065,quest066,quest067,quest068,quest069,quest070,quest071,quest072,quest073,quest074,quest075,quest076,quest077,quest078,quest079,quest080,quest081,quest082,quest083,quest084,quest085) function doQuestion(quest) { var numdo; var numord=eval(quest+1); var i=-1, ii, type, myname, gadget; type=questions[quest].type; numdo=type>=3?1:questions[quest].response.length; document.writeln ("") document.write("\n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write("

\n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write("

\n") document.write(" ") document.write(numord) document.write("\n") document.write("

\n") document.write("

\n") document.write(" ") if (questions[quest].img!="") { document.write("\n") document.write("

\n") document.write(" ") } document.write("\n") document.write(" ") document.writeln(questions[quest].qstring) document.write("\n") document.write("

\n") document.write(" ") for (i=0; i=3) gadget="text"; else if (type==1) { myname+="_"+(i<9?"0":"")+(i+1); gadget="checkbox";} document.write("\n") document.write(" ") document.write(type==7?"":"\" class=\"input\" value=\"\">\n") if (type<3) document.write(questions[quest].response[i]); document.write("
\n") document.write(" ") } document.write("\n") document.write("

\n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" \n") document.write(" ") } function doTest() { var count, i, newq; questions.sort(myrandom); newq=questions.slice(0,35);questions=newq; for (i=0; i=l) break; else s="0"+s; return s } function CheckQName(wapf,ii,i,multi,selection){ var len; if (!multi) return(wapf.elements[ii].name==questions[i].qname); len=questions[i].qname.length; if (wapf.elements[ii].name.substring(0,len)!=questions[i].qname) return false; if (wapf.elements[ii].name.substring(len,len+1)!="_") return false; if (eval(wapf.elements[ii].name.substring(len+1,len+3))==(selection+1)) return true; return false; } function errore(uno) { if (!errori) global[1]="

You have made the following errors

"; ++errori; cachewrite("

"+uno+"
This answer is not correct."+mycomment+"

",2); mycomment=""; } function testIE5plus(){ var pos=navigator.appVersion.lastIndexOf('MSIE '); if (pos != -1) { pos+=5; if (eval(navigator.appVersion.charAt(pos))>4) return true;} return false;} function correct(wapf) { var i, ii, t, re, tmp, selection, multi, multipage=0, type, isnull, iswrong, iscorrect, evaluation=0, total=0, udat; errori=waitTime=0; udat=new Array(); for (i=0, ii=0; i"+tmp.value+"
"; if (opera) tmp.value="";}} global[0]=global[2]=""; global[1]="

Congratulations, you haven't made any errors

"; cachewrite("Results

Results

",0) now= new Date() cachewrite("

"+fill((now.getMonth()+1),2)+"/"+fill(now.getDate(),2)+"/"+now.getYear()+" "+fill(now.getHours(),2)+":"+fill(now.getMinutes(),2)+"

",0) cachewrite("Liquid Penetrant Inspection 50 Question Quiz

\n",0); if (udat.length>0) { cachewrite("Information
\n",0); for (i=0; i=3 && wapf.elements[ii].value!="") { isnull=false; if (wapf.elements[ii].value.toLowerCase()==questions[i].corrects.toLowerCase()) iscorrect=true; else iswrong=true; ++selection;} else if (wapf.elements[ii].checked) { if (questions[i].score!="") evaluation+=questions[i].score[selection]; if (isnull) isnull=false; if (questions[i].corrects[selection]=="1") iscorrect=(iswrong==false)?true:false; else { iswrong=true; if (multi && questions[i].corrects!='') errore(questions[i].qname); } if (questions[i].comment!="" && questions[i].comment[selection]!="") mycomment+=((iscorrect || questions[i].corrects=='')?""+questions[i].qname+"
":"")+""+questions[i].comment[selection]+"
"; } else { if (questions[i].corrects[selection]=="1") { iswrong=true; if (multi && questions[i].corrects!='') errore(questions[i].qname); }} ++selection; }} if (multi==false && (isnull || iswrong)) { var okresp="", z; if (type>=3) okresp=questions[i].corrects; else { for (z=0; zYou have made "+errori+" "+(errori==1?"error":"errors")+".",2); cachewrite("
Total score: "+total+".
",2); cachewrite("

",2) cachewrite(aknw,2) winr=window.open('','wapres', 'titlebar=1,location=0,directories=0,menubar=1,toolbar=0,scrollbars=1,resizable=1,status=1') for (i=0; i<3; i++) winr.document.write(global[i]);winr.document.close() if ((opera || opera7) && multipage) { document.forms[0].elements[0].value='Print...'; document.forms[0].elements[1].value='Close'; for (i=0; i